Why do ceramic tiles deform during decoration

2022-07-22
  • Detail

Generally speaking, the most common phenomenon in use is that the bathroom tiles are tile flaky or arched, which is caused by the damp of the bathroom tiles. The reasons for the damp of the bathroom tiles are roughly the following:

generally speaking, the most common phenomenon in use is that the bathroom tiles are tile flaky or arched, which is caused by the damp of the bathroom tiles. The reasons for the damp of the bathroom tiles are roughly the following:

kanol tiles Kali bathroom

1 Moisture in the air (such as huangmeitian)

2. The floor is not completely dry, and the keel is reinforced with cement

3. Keel and wool bathroom tiles are too wet, so use water-based glue

4. There is no special moisture-proof treatment in the wet environment such as the first floor

5. The section at the junction of the stone floor and the bathroom tiles was not closed

6. Blisters (such as water pipe rupture, balcony water backflow, etc.)

7. In addition, the product itself and improper construction will also cause arching. For example, improper drying treatment, insufficient curing, too low moisture content, too shallow back groove, insufficient expansion joints during construction, too tight laying, etc

precautions:

1. After paving, you still need to pay attention to opening windows for ventilation, especially in rooms on the ground floor and with East windows. National and industrial standards stipulate that moisture removal measures must be taken to avoid possible moisture damage when the air humidity reaches more than 70%. Bathroom tiles are natural material products, and it is normal to produce a little cracks, warps and discoloration in use. And a small amount of bathroom tile noise, paint explosion or crack, crack is also difficult to completely avoid

2. According to the national standard, the inspection and acceptance must be carried out within three days after the paving. The owner had better keep a package of original bathroom tile samples, so that if there is a problem in the future, please ask the quality supervision department for inspection, so that we can distinguish whether it is the bathroom tile quality or the paving quality problem. The paved bathroom tiles cannot be identified as their own quality problem

3. Different responsible parties are responsible for product quality, construction quality and finished product maintenance quality. However, it must be reminded that the quality problems of wooden bathroom tiles sometimes occur not in one stage, but in the process of use, which will confuse the product quality, paving quality and use and maintenance quality of bathroom tiles. At this time, the after-sales service personnel must be calm, calm, carefully observe and test, and make careful judgments

4. In terms of responsibility and obligation, the moisture-proof and isolation project should be implemented by the decoration company. If the bathroom tiles are also paved by the decoration company, the responsibility for problems in the future is very clear. However, if the bathroom tile factory is responsible for the paving, the factory should confirm that the indoor moisture-proof isolation has been done before the paving. On the contrary, it should also do its duty to remind, and it is best to confirm in writing. Otherwise, once there is a dispute, it will be difficult to distinguish the responsibility, and ultimately consumers will suffer

广州胎记疤痕医院

盐城男科医院

杭州精神医院

长春男科医院

Copyright © 2011 JIN SHI